PoPs Suite
← All solutions

Solution

Insulation Estimating Software

Insulation is priced by the square foot, and the R-value drives everything: an R-13 wall batt, an R-19 for a 2 by 6 wall, an R-38 attic floor and an R-49 cold-climate attic are different products at different prices. Spray foam changes the math again. Estimating software for this trade should price by cavity and R-value.

What makes insulation estimating genuinely different

Batts are sold by R-value and cavity depth, kraft-faced for walls and unfaced for attic floors. Rigid foam board goes on exterior walls and under slabs. Spray foam is priced by thickness, open-cell for walls and attics, closed-cell for rim joists, below slab and masonry cavities. Mineral wool batts give fire and sound performance. And the trade reaches into fireproofing for structural steel and soundproofing: resilient channel, mass-loaded barrier, damping compound and sound-rated batts.

Why generic estimating software falls short here

A general tool has one insulation line. The R-values, cavity sizes and soundproofing parts get added by hand.

What PoPs Estimating actually gives you

A real item-level catalog:

  • Batts by R-value: fiberglass batts from R-11 through R-49, and mineral wool batts from R-15 through R-30.
  • Rigid foam and spray foam: polyiso board, open-cell and closed-cell spray foam, and injection foam for masonry cores.
  • Fireproofing: spray-applied fireproofing and intumescent coating for structural steel.
  • Soundproofing: acoustic batts, resilient channel, mass-loaded vinyl and damping compound.
  • Fire-rated wall batts: mineral wool for listed fire-rated wall assemblies.

Takeoff happens directly on the drawing (Count, Linear Feet, Square Feet) and feeds a Bid Summary with real markup control. The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table. When the job is won, the estimate hands off to PoPs Project Tracker as the starting budget.

Where this fits

Insulation sits beside Drywall, Carpentry and Waterproofing. Construction Bid Manager runs the pipeline around the bid.

What it costs

PoPs Estimating is included in the Starter plan at $49 a month, where you pick PoPs Estimating or Construction Bid Manager, and in the Pro and Enterprise plans. Pricing is per plan, not per seat, so adding an estimator does not raise the price. The free trial runs 14 days with no credit card. See the full pricing page.

Who this is for

FAQ

Is insulation priced by R-value?

Yes, batts are separate items by R-value and cavity depth.

Does it cover spray foam and soundproofing?

Yes, open-cell and closed-cell spray foam, resilient channel, mass-loaded barrier, damping compound and sound-rated batts.

Does the software include labor hours for this trade?

The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table.

Is it as deep as the electrical catalog?

Electrical is the deepest trade in the system today, with over 36,000 items in Division 26. Insulation is a focused set of about 24 items. It grows trade by trade.

What happens to the estimate once the job is won?

It hands off to PoPs Project Tracker as the starting budget, with nothing re-typed.