Solution
Excavation and Grading Estimating Software
Site work is priced by the cubic yard and by the machine day, and both can be wrong. Rock turns a dirt job into a hammer job. A tight site changes the machine. The haul distance decides the truck count. Mobilization, dewatering, trench boxes and erosion control are real costs that live outside the dirt number. Excavation estimating software should price the work and the machines together.
What makes excavation estimating genuinely different
Earthwork is a set of methods, not one price: mass cut and haul-off, cut and balance on site, tight-access digging with a mini excavator, rippable rock, hard rock with a hydraulic hammer. Trenching is priced by width and depth, with bedding, backfill, trench boxes and dewatering. Fill is imported clean, select or structural and compacted in lifts. Grading has rough, fine, slope and building pad levels, with driveway base in several depths. Then erosion control, drainage and retaining walls round out the site.
Why generic estimating software falls short here
A general tool prices site work as a unit price. The machines, haul, rock and erosion lines are guessed.
What PoPs Estimating actually gives you
A real item-level catalog with complete assemblies built from it:
- Excavation: mass cut and haul, cut and balance, tight-access excavation, rippable rock and hard rock.
- Trenches: footing trenches, utility trenches 2, 4 and 6 feet deep, trench boxes and dewatering.
- Fill and grading: clean, select and structural fill, rough, fine and slope grading, building pad prep, driveway and parking base in 4, 6 and 8 inches, and compaction.
- Equipment: mobilization, excavator and truck machine days, laser and GPS grade control, plus a set of equipment and operator rates.
- Erosion and drainage: silt fence, straw wattle, inlet protection, stabilized entrances, hydroseed, blankets, culverts, headwalls, French drains, swales, catch basins and riprap.
- Retaining walls: segmental block, geogrid, gabion, timber, cast-in-place and reinforced block walls in several heights.
- Clearing and haul items.
Takeoff happens directly on the drawing (Count, Linear Feet, Square Feet) and feeds a Bid Summary with real markup control. The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table. When the job is won, the estimate hands off to PoPs Project Tracker as the starting budget.
Where this fits
Excavation sits beside Underground Utilities, Paving, Landscaping and Irrigation and Concrete and Masonry. Construction Bid Manager runs the pipeline around the bid.
What it costs
PoPs Estimating is included in the Starter plan at $49 a month, where you pick PoPs Estimating or Construction Bid Manager, and in the Pro and Enterprise plans. Pricing is per plan, not per seat, so adding an estimator does not raise the price. The free trial runs 14 days with no credit card. See the full pricing page.
Who this is for
- Estimators & Subs — Bidding site work.
- General Contractors — Checking an excavation sub's bid.
FAQ
Does it separate rock from dirt?
Yes, rippable and hard rock are their own assemblies.
Are machine days and mobilization included?
They are their own lines, so they show up on the bid.
Does the software include labor hours for excavation?
The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table.
Is excavation as deep as the electrical catalog?
Electrical is the deepest trade in the system today, with over 36,000 items in Division 26. Excavation and grading has about 190 items and its own assemblies on the same structure. Depth grows trade by trade.
What happens to an excavation estimate once the job is won?
It hands off to PoPs Project Tracker as the starting budget, with nothing re-typed.