PoPs Suite
← All solutions

Solution

HVAC Estimating Software

An HVAC bid is easy to underprice because the equipment is only part of it. The condenser and furnace are the big numbers, but the pad, the line set, the disconnect, the whip, the plenums, the vent, the condensate and the thermostat are what separate a profitable install from a loss. HVAC estimating software should price the system, not just the box.

What makes HVAC estimating genuinely different

HVAC is sized in tons and BTUs, and the sizes drive everything around the equipment: a 2-ton and a 5-ton system need different furnaces, coils and electrical. Ductwork is its own takeoff, priced by the foot of round trunk or flex and by the register run, with fittings, hangers, mastic and wrap. Mini-splits are priced by head type (wall, ceiling cassette, ducted slim, floor console) and by zone count. Commercial jobs add rooftop units on curbs with economizers, exhaust fans, make-up air and variable air volume boxes. And replacement work, a furnace or condenser change-out, carries a different set of parts than a new install.

Why generic estimating software falls short here

A general tool treats HVAC as equipment lines plus a lump for ductwork. The setting package, the duct system and the controls get rebuilt by hand, and every system size becomes its own spreadsheet.

What PoPs Estimating actually gives you

A real item-level HVAC catalog with complete assemblies built from it:

  • Whole systems by size: gas furnace plus air conditioner, and heat pump plus air handler, in 2, 2.5, 3, 3.5, 4 and 5 ton sizes, each priced per system.
  • Setting packages: the condensing unit pad, line set, disconnect and whip; the furnace plenums, vent kit, condensate, gas connection and thermostat.
  • Ductwork: supply and return register runs, whole-house duct systems, round spiral trunk runs in several sizes, and flex duct runs, each with fittings, supports, mastic and wrap as they apply.
  • Mini-splits: single-zone systems in wall-mount, ceiling cassette, ducted slim and floor console heads, and multi-zone systems of two, three and four zones, plus extra line set beyond the precharge.
  • Replacement work: furnace change-outs by size, air conditioner and heat pump change-outs, adding a zone to an existing system, and adding a mini-split to an existing house.
  • Ventilation: bath exhaust fans, range hoods and energy recovery ventilators.
  • Light commercial: rooftop units from 5 to 15 tons with curb, economizer and disconnect, roof exhaust fans, restroom exhaust, make-up air units and variable air volume zones.

Takeoff happens directly on the drawing (Count, Linear Feet, Square Feet) and feeds a Bid Summary with real markup control. The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table. The AI assembly helper works from the real catalog, so it does not suggest parts that are not in your price list. When the job is won, the estimate hands off to PoPs Project Tracker as the starting budget.

Where this fits

HVAC sits in the same catalog as Electrical, Plumbing, Carpentry, Drywall and Concrete estimating. If bidding is only part of the picture, Construction Bid Manager runs the pipeline around it with PoPs Estimating handling the pricing.

What it costs

PoPs Estimating is included in the Starter plan at $49 a month, where you pick PoPs Estimating or Construction Bid Manager, and in the Pro and Enterprise plans. Pricing is per plan, not per seat, so adding an estimator does not raise the price. The free trial runs 14 days with no credit card. See the full pricing page.

Who this is for

FAQ

Is a whole system priced from one pick?

Yes. Whole-system assemblies in standard sizes include the equipment and the setting parts around it, so the system is one line that still shows its components.

Does it cover replacement work as well as new installs?

Yes. Furnace, air conditioner and heat pump change-outs, adding a zone and adding a mini-split to an existing house are separate assemblies.

Does the catalog cover mini-splits and commercial rooftop units?

Yes. Mini-splits come in four head types and up to four zones, and rooftop units come with curb, economizer and disconnect.

Does the software include labor hours for HVAC?

The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table.

Is HVAC as deep as the electrical catalog?

Electrical is the deepest trade in the system today, with over 36,000 items in Division 26. HVAC has several hundred items and its own assemblies on the same structure. Depth grows trade by trade.

What happens to an HVAC estimate once the job is won?

It hands off to PoPs Project Tracker as the starting budget, with nothing re-typed.