PoPs Suite
← All solutions

Solution

Plumbing Estimating Software

A plumbing bid is a thousand small parts that only mean something when they are grouped: the toilet, the supply stop, the trap, the vent, the wax ring, the three feet of pipe. Price them one at a time and the bid takes all day and still misses the fitting that was not on the list. Plumbing estimating software should let you pick "full bathroom" or "40 feet of 3-inch drain" and bring the parts along with it.

What makes plumbing estimating genuinely different

Plumbing is priced three ways at once. New work is priced by the fixture and by the foot of pipe. Service work is priced by the call: a main line camera inspection and hydro-jet, a water heater swap with the old unit hauled away, a septic pumping. And the materials change the price of the same run: copper, PEX, CPVC for supply; PVC and cast iron no-hub for drain; black iron and corrugated stainless for gas. Each run also carries its own fittings, hangers and insulation, which are the lines that disappear when the takeoff is rushed.

Why generic estimating software falls short here

A general tool gives plumbing a short list of pipe and a markup. The estimator rebuilds fixture groups, pipe runs and water heater installs by hand on every bid, and service pricing lives in a separate spreadsheet.

What PoPs Estimating actually gives you

A real item-level plumbing catalog with complete assemblies built from it:

  • Fixtures, rough-in and set: water closets, lavatories, tub-showers, tile showers with drain bodies, kitchen sinks with disposal, dishwasher hookups, washing machine boxes, floor drains, hose bibbs, and commercial water closets, urinals, wall-hung lavatories, mop sinks and drinking fountains, each priced per fixture.
  • Bathroom and kitchen groups: half bath, full bath, master bath and kitchen groups built from those fixtures, priced per bathroom or per kitchen.
  • Water heaters: gas tank, electric tank and tankless gas, each complete with the water, gas, vent and condensate connections that belong to it.
  • Pipe runs per linear foot: PEX, copper and CPVC supply; PVC and cast iron no-hub drain; black iron and CSST gas lines, each with fittings, hangers, insulation or bonding included.
  • Underground and sewer: building drain to the city sewer or to a septic tank, in 4 and 6 inch.
  • Backflow, recirculation and repipe: reduced pressure zone backflow sets, hot water recirculation loops and whole-house PEX repipes.
  • Service work: main line camera inspection and hydro-jetting, water heater replacement, septic pumping and jet cleaning.

Takeoff happens directly on the drawing (Count, Linear Feet, Square Feet) and feeds a Bid Summary with real markup control. The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table. The AI assembly helper works from the real catalog, so it does not suggest parts that are not in your price list. When the job is won, the estimate hands off to PoPs Project Tracker as the starting budget.

Where this fits

Plumbing sits in the same catalog as Electrical, Carpentry, Drywall and Concrete estimating. If bidding is only part of the picture, Construction Bid Manager runs the pipeline around it (leads, requests for quotes, win and loss tracking) with PoPs Estimating handling the pricing.

What it costs

PoPs Estimating is included in the Starter plan at $49 a month, where you pick PoPs Estimating or Construction Bid Manager, and in the Pro and Enterprise plans. Pricing is per plan, not per seat, so adding an estimator does not raise the price. The free trial runs 14 days with no credit card. See the full pricing page.

Who this is for

FAQ

Can I price a whole bathroom from one pick?

Yes. Half bath, full bath and master bath groups are built from the fixture assemblies, and each fixture carries its rough-in parts, so a bathroom is one line that still shows its components.

Does it cover service work, or only new construction?

Both. Main line service calls, water heater replacement and septic service are assemblies in the same catalog.

Are different pipe materials priced separately?

Yes. PEX, copper and CPVC supply, PVC and cast iron drain, and black iron and CSST gas are separate runs, each with its own fittings and hangers.

Does the software include labor hours for plumbing?

The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table.

Is plumbing as deep as the electrical catalog?

Electrical is the deepest trade in the system today, with over 36,000 items in Division 26. Plumbing has several hundred items and its own assemblies on the same structure. Depth grows trade by trade.

What happens to a plumbing estimate once the job is won?

It hands off to PoPs Project Tracker as the starting budget, with nothing re-typed.