Solution
Stucco and Plaster Estimating Software
A stucco bid is lath, paper, three coats, a finish, and a long list of metal: weep screed, casing bead, control joints, corner bead. Skip one and the bid is short. Add scaffold rental and the curing, and a simple wall becomes a real job. Stucco estimating software should price the system and the accessories together.
What makes stucco and plaster estimating genuinely different
Stucco is priced by substrate and finish. Three-coat over wood frame, over block or concrete, with job-mixed or premixed base, and finishes from sand-float to dash, skip trowel, integral color and acrylic. EIFS is priced by foam thickness, with or without a drainage mat. Repair work is its own set: patching, crack repair, elastomeric topcoat, water-repellent sealer, curing. Interior work adds veneer plaster, gypsum plaster on lath, Venetian and lime plaster.
Why generic estimating software falls short here
A general tool has one wall finish line. Lath, paper and metal accessories are added by hand.
What PoPs Estimating actually gives you
A real item-level catalog with complete assemblies built from it:
- Three-coat stucco: over wood frame in six finish and mix variants, and over block or concrete, with lath and paper included.
- EIFS: 1, 1-1/2 and 2 inch foam, and with a drainage mat.
- Repairs and curing: patching, crack repair, elastomeric topcoat, water-repellent sealer, curing and a complete re-stucco package.
- Accessories: weep screed, casing bead, control joints, corner bead, nose bead, drip screed, expansion joints and scaffold rental.
- Foam shapes: trim bands, reveals, quoins, sills, keystones and column wraps with base coat and finish.
- Interior plaster: veneer plaster, three-coat gypsum plaster, Venetian plaster, lime plaster and patching.
Takeoff happens directly on the drawing (Count, Linear Feet, Square Feet) and feeds a Bid Summary with real markup control. The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table. When the job is won, the estimate hands off to PoPs Project Tracker as the starting budget.
Where this fits
Stucco sits beside Painting, Concrete and Masonry and Siding. Construction Bid Manager runs the pipeline around the bid.
What it costs
PoPs Estimating is included in the Starter plan at $49 a month, where you pick PoPs Estimating or Construction Bid Manager, and in the Pro and Enterprise plans. Pricing is per plan, not per seat, so adding an estimator does not raise the price. The free trial runs 14 days with no credit card. See the full pricing page.
Who this is for
- Estimators & Subs — Bidding stucco, EIFS and plaster.
- General Contractors — Checking a stucco sub's bid.
FAQ
Are the metal accessories included?
They are their own lines, per linear foot, so they show up on the bid.
Does it cover EIFS and interior plaster?
Yes, EIFS by thickness and interior veneer, gypsum, Venetian and lime plaster.
Does the software include labor hours for stucco?
The catalog is ready for your labor units: enter your own production rates and your bids carry your labor, not an average from someone else's table.
Is stucco as deep as the electrical catalog?
Electrical is the deepest trade in the system today, with over 36,000 items in Division 26. Stucco and plaster has over a hundred items and its own assemblies on the same structure. Depth grows trade by trade.
What happens to a stucco estimate once the job is won?
It hands off to PoPs Project Tracker as the starting budget, with nothing re-typed.